# Track Mileage on Rental Vehicles (/how-to/equipment/track-mileage)



This guide sets up mileage tracking for a vehicle fleet with a [tracked field](/docs/bookings/tracked-fields). Staff record the odometer when the vehicle goes out and when it comes back, each booking shows the distance driven, and each vehicle keeps its own mileage history.

The same steps work for anything else you measure on equipment: engine hours on a jet ski, the fuel or charge level, a condition note. Mileage is only the example.

Mileage is recorded, not charged. A reading never changes a booking's price or balance.

Before You Start [#before-you-start]

* You need the **Company Settings** permission to add the field. Staff who record readings on bookings need **Bookings: Edit**.
* Reading a vehicle's history (Step 4) needs **Resources: View**. Adding a reading between bookings needs **Resources: Edit**.
* Each vehicle needs an **equipment instance**, because the reading is stored against the physical vehicle. A common setup is one equipment item per vehicle, with a quantity of 1 and one instance carrying the VIN. See [Add an Equipment Instance](/how-to/equipment/add-instance).

Step 1: Add the Odometer Field [#step-1-add-the-odometer-field]

1. Click your name in the top right corner, choose **Location Settings**, then open **Tracked Fields**.
2. Select **Add Field**.
3. Fill it in:

| Setting          | Value                                                                                               |
| ---------------- | --------------------------------------------------------------------------------------------------- |
| **Name**         | Odometer                                                                                            |
| **Type**         | Number                                                                                              |
| **Unit**         | mi (or km)                                                                                          |
| **Recorded on**  | Each equipment instance                                                                             |
| **Recorded**     | At the start and the end                                                                            |
| **Required**     | On, to mark both readings as required on each booking. It is a reminder and does not block anything |
| **Only goes up** | On                                                                                                  |

4. Under **Applies to**, leave **All activities**, or choose **Chosen activities** and tick the ones that should log mileage. Type part of a name in the search box and use the select button to tick every match at once.
5. Select **Add Field**.

The **Type** and **Recorded on** cannot be changed after the field is added, so check those two before you save.

Step 2: Record the Mileage at Handover [#step-2-record-the-mileage-at-handover]

1. Open the booking and choose the **Records** tab.
2. Under the vehicle's name, enter the odometer reading in **Start**. The **Last reading** beside the field shows the vehicle's most recent reading from before this booking, so a typo stands out.
3. Select **Save**.

When you own one of the vehicle and it has one instance, the booking asks for that vehicle straight away, and saving the first reading assigns it to the booking. If the equipment has several units, select **Choose a unit** first and pick the one that went out.

This works the same on a phone at the vehicle and on a computer in the office.

Step 3: Record the Mileage at Return [#step-3-record-the-mileage-at-return]

1. Open the booking's **Records** tab again.
2. Enter the reading in **End**. The **Difference** line shows the distance driven.
3. Select **Save**.

If a reading looks wrong (the end is below the start, or below the vehicle's previous reading), a notice appears after saving and stays on the screen. The value is still saved. Correct it and save again.

Step 4: Read a Vehicle's Mileage History [#step-4-read-a-vehicles-mileage-history]

1. Open **Equipment**, choose the vehicle, then **Settings > Instances**, and open the instance.
2. The **Records** section shows the current odometer reading and the readings before it, newest first. A reading taken on a booking links to that booking. Select **Show more** to go further back.

Because the readings belong to the vehicle, its rentals, chauffeur jobs and tours all land in the same history, as long as those activities book the same equipment.

Record Mileage Between Bookings [#record-mileage-between-bookings]

When a vehicle is driven with no booking, for example to a service or between locations:

1. On the instance's **Records** section select **Add Entry**.
2. Enter the reading and select **Add Entry**.

The entry is recorded as of now, so add it when the drive happens.

Tips [#tips]

* **Filling in a reading late is fine.** A reading entered days later still sits at its booking's start or end in the vehicle's history, not at the top.
* **Correct on the booking.** A reading taken on a booking is corrected on that booking's Records tab. Entries made between bookings are corrected on the instance page.
* **A vehicle with readings cannot be deleted.** Mark the instance [out of service](/how-to/equipment/mark-out-of-service) to retire it and keep its history.
* **Add more fields the same way.** A fuel level (Number, %) and a condition note (Text) recorded at the start and the end sit beside the odometer on the same tab.
