Track Mileage on Rental Vehicles
Set up an odometer field, record the start and end mileage on each booking, and read a vehicle's mileage history.
This guide sets up mileage tracking for a vehicle fleet with a tracked field. Staff record the odometer when the vehicle goes out and when it comes back, each booking shows the distance driven, and each vehicle keeps its own mileage history.
The same steps work for anything else you measure on equipment: engine hours on a jet ski, the fuel or charge level, a condition note. Mileage is only the example.
Mileage is recorded, not charged. A reading never changes a booking's price or balance.
Before You Start
- You need the Company Settings permission to add the field. Staff who record readings on bookings need Bookings: Edit.
- Reading a vehicle's history (Step 4) needs Resources: View. Adding a reading between bookings needs Resources: Edit.
- Each vehicle needs an equipment instance, because the reading is stored against the physical vehicle. A common setup is one equipment item per vehicle, with a quantity of 1 and one instance carrying the VIN. See Add an Equipment Instance.
Step 1: Add the Odometer Field
- Click your name in the top right corner, choose Location Settings, then open Tracked Fields.
- Select Add Field.
- Fill it in:
| Setting | Value |
|---|---|
| Name | Odometer |
| Type | Number |
| Unit | mi (or km) |
| Recorded on | Each equipment instance |
| Recorded | At the start and the end |
| Required | On, to mark both readings as required on each booking. It is a reminder and does not block anything |
| Only goes up | On |
- Under Applies to, leave All activities, or choose Chosen activities and tick the ones that should log mileage. Type part of a name in the search box and use the select button to tick every match at once.
- Select Add Field.
The Type and Recorded on cannot be changed after the field is added, so check those two before you save.
Step 2: Record the Mileage at Handover
- Open the booking and choose the Records tab.
- Under the vehicle's name, enter the odometer reading in Start. The Last reading beside the field shows the vehicle's most recent reading from before this booking, so a typo stands out.
- Select Save.
When you own one of the vehicle and it has one instance, the booking asks for that vehicle straight away, and saving the first reading assigns it to the booking. If the equipment has several units, select Choose a unit first and pick the one that went out.
This works the same on a phone at the vehicle and on a computer in the office.
Step 3: Record the Mileage at Return
- Open the booking's Records tab again.
- Enter the reading in End. The Difference line shows the distance driven.
- Select Save.
If a reading looks wrong (the end is below the start, or below the vehicle's previous reading), a notice appears after saving and stays on the screen. The value is still saved. Correct it and save again.
Step 4: Read a Vehicle's Mileage History
- Open Equipment, choose the vehicle, then Settings > Instances, and open the instance.
- The Records section shows the current odometer reading and the readings before it, newest first. A reading taken on a booking links to that booking. Select Show more to go further back.
Because the readings belong to the vehicle, its rentals, chauffeur jobs and tours all land in the same history, as long as those activities book the same equipment.
Record Mileage Between Bookings
When a vehicle is driven with no booking, for example to a service or between locations:
- On the instance's Records section select Add Entry.
- Enter the reading and select Add Entry.
The entry is recorded as of now, so add it when the drive happens.
Tips
- Filling in a reading late is fine. A reading entered days later still sits at its booking's start or end in the vehicle's history, not at the top.
- Correct on the booking. A reading taken on a booking is corrected on that booking's Records tab. Entries made between bookings are corrected on the instance page.
- A vehicle with readings cannot be deleted. Mark the instance out of service to retire it and keep its history.
- Add more fields the same way. A fuel level (Number, %) and a condition note (Text) recorded at the start and the end sit beside the odometer on the same tab.
Mark an Equipment Instance Out of Service
Toggle a specific physical unit off so it stops counting toward bookable availability — for repairs, damage, missing units, anything that takes a unit offline temporarily.
Incidents
Guides for documenting operational events — creating incidents, linking records, adding notes and attachments, attaching waivers, and closing them out.
